Configurator · Welding curtain with PVC viewing window

Configure a welding curtain with viewing window

Define dimensions, height and colour of the viewing window, eyelets and mounting system. You receive a configuration sheet with technical drawing straight away, our team will send you the quotation.

  • Free and without obligation
  • PVC to EN ISO 25980
  • Configuration sheet as PDF
  • Direct from the manufacturer

Size, viewing window and eyelets

Enter each curtain size as a separate item. Dimensions are finished sizes. Then define the lower edge of the viewing window, the PVC colour and the eyelets. The 3D view shows the panels with their heights.

Build-up and version Fabric GF660.G1 to EN 13501-1, A2
  • Fabric GF660.G1 to EN 13501-1, A2, fixed
  • Lower fabric panel up to the lower edge of the viewing window, bottom hem 20 mm
  • PVC strip 540 mm high, lower edge at 1,200 or 1,450 mm
  • Upper fabric panel up to the finished height, max. 1,850 mm, top hem 50 mm with eyelets
  • Left and right edges bound with yellow aramid tape 50 mm, 25 mm per side front and back
  • Brass eyelets ID 16 mm centred in the top hem, first and last eyelet 70 mm from the edge

Protects bystanders against optical radiation and spatter from arc welding processes. Does not replace the eye and face protection of the welder.

You are editing

    Mounting and accessories

    Our track system is calculated from your configuration. You can change any quantity. About the track system

    Send your request

    Check the summary and add your contact details. You receive the configuration sheet as PDF straight away, the quotation follows by e-mail.

    Contact details

    Dimensions are finished sizes. Fabric and textile make-up (seams, hems) can cause deviations, in width usually up to ±5 %, at least ±50 mm.

    The size, eyelets and name of this position will be removed from your configuration.