Battery take-back · Retail · Public spaces
BOXXO battery collection box made of steel
The safe alternative to the cardboard collection box: a return container for used batteries, e-cigarettes and disposable vapes that keeps flames and sparks inside instead of becoming a fire load itself.
- Material
- Steel
- Volume
- 14 l
- Insertion slot
- Self-closing
- Empty weight
- 5.3 kg
- Housing made entirely of steel
- Fire-tested
Product description
The new generation of safe battery collection containers
Collection containers for used batteries stand at checkouts, in drugstores, supermarkets, petrol stations, schools and public offices. Most of them are boxes made of ordinary cardboard. For household batteries they were sufficient for a long time. Today, however, more and more lithium-ion batteries, e-cigarettes and disposable vapes end up in them.
The BOXXO battery collection box closes this safety gap. The container is made entirely of steel, the insertion slot closes by itself, two safety snap locks keep the lid shut and permanently integrated degassing openings with a flame arrester grille release pressure and gases in a controlled way. If a reaction occurs inside, flames and sparks stay in the container.
With a volume of 14 l and external dimensions of 380 × 240 × 220 mm, the box fits on checkout counters, shelves and service desks. It is stackable, fire-tested and available in customer colours on request, so the take-back point blends into the look of the location.
The safety gap in the cardboard box
One wrongly disposed battery is enough
Cardboard collection boxes state which batteries belong in them. In practice, these notes are often overlooked. Besides portable batteries, lithium-ion batteries from e-cigarettes and disposable vapes, power banks, Bluetooth headphones, smartwatches, fitness trackers, electric toothbrushes, toys or mobile phones end up in the box, some of them damaged, some with exposed terminals.
A single defective or short-circuited battery can heat up, go into thermal runaway and set off neighbouring batteries. In a cardboard box this reaction meets combustible material and a permanently open insertion slot. A battery defect can quickly turn into a fire at the checkout, in the storeroom or in the delivery vehicle, and the risk lies with the operator of the collection point.

Technical comparison
Cardboard collection box and BOXXO compared
Both containers collect used batteries. What matters is what happens when a battery reacts inside.
|
|
![]() |
|
|---|---|---|
| Container material | Ordinary cardboard, combustible | Steel, non-combustible |
| Battery reacting inside | The box can ignite and becomes a fire load itself | Flames and sparks stay inside the steel container |
| Insertion slot | Permanently open slot, air flows in | Self-closing insertion flap |
| Closure | Flaps or adhesive tape | Two safety snap locks with lever system on both sides |
| Pressure and gases | No defined relief, the box tears or opens in an uncontrolled way | Degassing openings with flame arrester grille on the rear |
| Fire test | Usually not fire-tested | Fire-tested |
| Robustness in daily use | Sensitive to moisture, knocks and overloading | Robust steel housing, stackable, max. 30 kg gross weight |
| Service life | Consumable, replaced regularly | Permanent return station, available in customer colours |
The cardboard box is shown schematically and does not represent any specific provider.
Safety features
Four features that make the difference
-
Housing
Made entirely of steel
Body and lid are made of steel. The container itself adds no fire load and keeps flames and sparks inside.
-
Insertion
Self-closing insertion flap
The flap only opens when something is dropped in and then closes by itself. The opening never stays open permanently.
-
Closure
Two safety snap locks
A lever lock system on both sides keeps the lid securely closed, also while the box is carried away for emptying.
-
Degassing
Degassing with flame arrester grille
Permanently integrated degassing openings on the rear release pressure and reaction gases in a controlled way. The flame arrester grille holds back flames.
Take-back in retail
More take-back points, more lithium-ion batteries
Retailers and municipalities take back more and more battery-powered small devices. In Germany, since 1 July 2026 every point of sale that sells e-cigarettes must take back used devices free of charge, regardless of its size and without a new purchase. This brings lithium-ion batteries into the return flow at kiosks, petrol stations and small shops as well.
The more of these devices are collected in one place, the more important a container becomes that keeps a single reaction under control before it spreads to goods, fittings or people.
Onward transport of collected lithium batteries is subject to dangerous goods regulations. For this purpose the UN-certified SECON KMB dangerous goods container is available.

Dimensions
Compact for checkout, shelf and service desk

-
380 × 240 × 220 mm
Length × width × height overall, including the lid rim.
-
90 × 50 mm
For portable batteries, rechargeable batteries and disposable vapes, self-closing.
-
14 l
Maximum permissible gross weight 30 kg, empty weight 5.3 kg.
Technical data
The BOXXO battery collection box at a glance
Container
- Product
- BOXXO battery collection box
- Use
- Return station for used batteries, e-cigarettes and disposable vapes
- Material
- Steel
- Volume
- 14 l
- External size (L × W × H)
- 380 × 240 × 220 mm
- Insertion slot
- 90 × 50 mm, self-closing
- Empty weight
- 5.3 kg
- Max. permissible gross weight
- 30 kg
Safety and features
- Closure
- Two safety snap locks, lever lock system on both sides
- Degassing
- Degassing openings with flame arrester grille on the rear
- Fire behaviour
- Fire-tested
- Handling
- Two handles on the end faces
- Stackable
- Yes
- Colour
- Red, customer colours on request
The box is a collection container for the take-back point. Transport of collected lithium batteries is subject to dangerous goods regulations.
Features and locations
For every take-back point with public access
Features
- Housing and lid made entirely of steel
- Self-closing insertion flap 90 × 50 mm
- Two safety snap locks with lever system
- Degassing openings with flame arrester grille
- Fire-tested
- 14 l volume on a compact footprint
- Stackable, with handles on both end faces
- Customer colours on request
Typical locations
- Supermarkets and discounters
- Drugstores and electronics retailers
- Petrol stations and kiosks
- Vape and tobacco shops
- DIY and home improvement stores
- Recycling centres and municipal collection points
- Schools, public authorities and public buildings
- Companies with their own battery collection
Further solutions
For transporting, storing and charging batteries
Fire protection systems
-
UN 4H2
SECON KMB dangerous goods container
UN-certified reusable dangerous goods packaging for take-back and transport of lithium-ion batteries.
-
30 × 20 × 15 cm
Fire protection bag for lithium-ion batteries
Compact bag with flexible dividers for tool, drone, camera and RC batteries.
-
60 × 40 cm
Fire protection bag for lithium-ion mobile devices
Flat bag to quickly separate conspicuous laptops, tablets and smartphones.
All fire protection systems at a glance
Blankets, covers, bags and containers for lithium-ion batteries, from battery packs to electric vehicles.
Frequently asked questions
Questions about the BOXXO battery collection box
Why is a cardboard collection box a risk?
Despite the notes on the box, lithium-ion batteries, e-cigarettes and disposable vapes end up in it, some damaged or with exposed terminals. If one of these batteries reacts, the reaction meets combustible cardboard and a permanently open slot. The box can ignite and spread the fire.
What happens if a battery reacts inside the BOXXO?
The steel container itself does not burn. Flames and sparks stay inside, the insertion flap is closed and the snap locks keep the lid shut. Pressure and reaction gases are released in a controlled way through the degassing openings with flame arrester grille on the rear.
Which batteries and devices may be dropped in?
The box is designed as a return station for used batteries, rechargeable batteries, e-cigarettes and disposable vapes. Which batteries are accepted at your take-back point is defined by you or your take-back scheme. The insertion slot measures 90 × 50 mm.
Is the BOXXO dangerous goods packaging for transport?
The BOXXO is a collection container for the take-back point. Transport of collected lithium batteries is subject to dangerous goods regulations and requires approved dangerous goods packaging such as the SECON KMB.
What are the dimensions of the box?
External dimensions are 380 × 240 × 220 mm (L × W × H) with a volume of 14 l. The box weighs 5.3 kg, the maximum permissible gross weight is 30 kg.
Is the box available in other colours?
Yes. Besides the red standard version, the BOXXO is available in customer colours on request, for example to match the look of your stores.
Enquiry
Enquire about BOXXO
Tell us the quantity, locations and preferred colour. We will advise you and send you a quote.
- Phone
- +49 2636 970-227
- info@heatprotection.de
- Location
- Vulkanhof 1 · 56651 Niederzissen · Germany




